1. Home
  2. Troubleshooting
  3. BBPOS Chipper 2x BT Status Light
  1. Home
  2. Hardware
  3. Card Readers
  4. BBPOS Chipper 2x BT Status Light

BBPOS Chipper 2x BT Status Light

Status light 

Whenever the BBPOS Chipper 2X BT is turned on, the LED located beside the power button shows the reader’s current status.



None The reader is off.
Flashing blue every second The reader is on and ready to connect to a device. (Will turn off after 5 min.)
Multicolored flashing The reader has been discovered using Bluetooth Proximity and is ready to connect.
Steady blue The reader is connected to a device.
Flashing blue every 5 seconds The reader is in standby mode. (Will remain in standby indefinitely.)
Alternating red and magenta The reader is charging.
Flashing red The reader’s battery is low.
Rapidly flashing blue and orange The reader has finished installing a software update. If the reader is unresponsive after the update completes, restart the reader by turning it off and on.



Updated on August 5, 2021

Was this article helpful?

Related Articles